Heat Reflective & Waterproof Paint

Product introduction

Heat Reflective & Waterproof Paint
19HRWP-R

Application

– Residential and commercial facilities such as houses, apartments, studio apartments, and plants
– Different kinds of commercial facilities such as plants and shopping complexes
– Outdoor facilities

Previous screen

Product configuration

Heat Reflective & Waterproof Paint product is a complex functional top coating used for thermal barrier and waterproofing on roofs (rooftops). With excellent thermal barrier capability and a high elongation rate of 900% or more, it can respond to building vibrations and protect the building from ultraviolet rays and moisture, supplementing the weak points of previous oil-type urethane waterproof material. It is applicable to roofs and rooftops of buildings or other areas on external concrete where construction or repair is required.

Product characteristics

– It is a complex functional paint with eco-friendly thermal barrier & waterproof capability.
– It provides excellent thermal barrier capability with high emissivity and reflectivity.
– With high elongation rate of 900% or above, it can respond to vibration occurred on the building.
– With excellent waterproof capability and resistance to moisture, it can protect resin surface from moisture.
– With high resistance to weather, it can provide strong performance to external environment.

Product characteristics

Product volume	18L	Tools	Airless, roller, brush
Color	White **Mixing color is possible (contact manufacturer)	Recommended dry membrane	1.0mm or above (for dry membrane)
Gloss	Gloss	Construction area	Approx. 7~9㎡ (2 ~ 3 pyeong) for concrete
Painting type	1Liquid type	Theoretical painting area	● Concrete (for 1mm of dry membrane) -1.6kg /㎡ ● Metal and PVC composite material (for 1.2mm of dry membrane) 1.92kg /㎡
Thinner	Water	Drying(20℃)	Hard dry	Recoat interval	Complete hardening
Mixing ratio	Less than 10%	hours	2hours	2hours	24hours

How to use and caution

How to use	– Painting condition is where ambient temperature is at 5~35℃ and humidity is at 80% or below. – Mix the paint sufficiently before using on construction. – After going through surface processing, apply paint so that primer can penetrate deeply into the painting surface. – After applying primer on the surface, dry for 4 hours at 20℃ and apply top coating twice. Aqueous paint can be used for mixing color. (basic color: white) Minimum amount for mixing color is 50 packs or above. (pastel color is possible)
caution	– Concrete surface should be sufficiently cured (4 weeks or above at 20℃) and apply paint when pH is 8 ~ 9 or below and moisture content is 8% or below. – Aqueous paint should be stored in indoor areas (at room temperature of 5℃ or above) that can avoid direct light. – Crack area should be filled and surface should be flattened using filler after applying V cutting – If surface processing is insufficient, it might lead to poor adhesion and detachment of membrane. – In case of exceeding recommended amount (within 10%) of diluent (water), it might lead to reduction in material property. – In case of applying paint on the previous membrane, check for the suitability with previous membrane before using. – Color difference might occur on the product with same color and lot depending on the dilution ratio, painting device, and painting method, so check the color before painting.

How to use

– Painting condition is where ambient temperature is at 5~35℃ and humidity is at 80% or below.
– Mix the paint sufficiently before using on construction.
– After going through surface processing, apply paint so that primer can penetrate deeply into the painting surface.
– After applying primer on the surface, dry for 4 hours at 20℃ and apply top coating twice.
** Aqueous paint can be used for mixing color. (basic color: white)
**Minimum amount for mixing color is 50 packs or above. (pastel color is possible)

caution

– Concrete surface should be sufficiently cured (4 weeks or above at 20℃) and apply paint when pH is 8 ~ 9 or below and moisture content is 8% or below.
– Aqueous paint should be stored in indoor areas (at room temperature of 5℃ or above) that can avoid direct light.
– Crack area should be filled and surface should be flattened using filler after applying V cutting
– If surface processing is insufficient, it might lead to poor adhesion and detachment of membrane.
– In case of exceeding recommended amount (within 10%) of diluent (water), it might lead to reduction in material property.
– In case of applying paint on the previous membrane, check for the suitability with previous membrane before using.
– Color difference might occur on the product with same color and lot depending on the dilution ratio, painting device, and painting method, so check the color before painting.

Product introduction