New Aqua (for floors)
New Aqua (for floors)
Application
– Concrete floors
– Parking lots
– Parking lot trenches
– Factory floors
– Wet concrete
– Parking lots
– Parking lot trenches
– Factory floors
– Wet concrete
Product configuration
New Aqua (P-105) is suitable for floor construction requiring strong adhesion and resistance to abrasion in wet places. It can overcome the reality where floor concrete is exposed to moisture and construction is carried out while exceeding water content. Construction can be applied to parking lot trenches or other places that are exposed to moisture.
Product characteristics
– It can be applied for adhesion with concrete in a wet place to prevent lifting.
– Lining construction can be applied for 0.3–3 mm of membrane thickness with 1 time construction,
– which can lead to cost reduction.
– With resistance to abrasion similar to ceramics, it can secure excellent durability.
– It can prevent oxidation in the background surface by preventing neutralization.
– Construction can be carried out to wet trenches.
– It is an eco-friendly product that can improve work convenience and minimize environmental pollution.
Product characteristics
| Background surfaces : Concrete | Recommended thickness : 500㎛ / Usage per package : 35㎡ |
| Background surfaces : Epoxy | Recommended thickness : 500㎛ / Usage per package : 40㎡ |
| Tools | Rake, Roller, brush |
How to use and caution
| How to use | – Grinding and planing are carried out together depending on the status of background surface. – After going through primer, apply 1st New Aqua paint. – If the thickness is 1,000 μm or more, use a rake. – After checking that walking is possible 24 hours after the 2nd painting, carry out the follow-up work. – For the water remaining after applying high-pressure cleaning on trench construction, remove moisture using a ventilator. – Items not specified here are identical with general solvent. |
|---|---|
| caution | – – It should not be exposed to direct sunlight and should be stored in a sealed container at a temperature of 5–30°C or under. – For constructions when the air temperature is under 5℃, consult with the company. – Do not use the diluent made by another company. – It is recommended to use boiling water for the construction in winter season. – For using diluent, consult with the company. ((odorless diluent)) |